Enigma Carpark Barrier

Enigma Carpark Barrier

Features:

Heavy-duty and simple-design cabinet

The cabinet adopts 2mm precise machining cold-rolled plate and static electricity sprayed anti-UV surface which is non-scale and
Unfading, conformed to the IP54 dustproof and waterproof. Simple design also decorates your premises.

Automatic error self-check &report

The barrier itself automatically checks the operation status, and reports errors by showing different error code on LED tube

Maintenance-free 70W torque motor 100% duty cycle

The 70W integrated decelerating torque motor is environmentally friendly, energy-saving, and maintenance-free. No current shock
And overheating while working, it protects the controller and prolong its lifetime. Also it is 100% duty cycle.

 Boom open up fully or close down in case of power failure

If power is suddenly off while boom closing, boom will automatically close down fully if the angle between boom and vertical planebeyond 45 degree. If power failure occurs during boom opening, boom will automatically continue to open up fully if the angle between boom and level surface beyond 45 degrees.

Sine lever drive mechanism ensures smooth landing of boom without shaking

The patented precise casting sine lever drive mechanism enables the boom arm moves from slow to fast when it starts, and fast to
slow when it stops. This will effectively reduce the shaking of the boom arm and allay the burden of the electrical motor, so that the lifetime of the motor and mechanical components will be greatly prolonged.

 Automatically close after given time

The barrier will automatically closes after given time (1-99 seconds adjustable) if there is no vehicle passed after barrier open.
No loop detector and induction coil required

 Anti-collision mechanism protects arm (optional)

Anti-collision mechanism protects the boom arm not to be damaged once boom arm was collided by a vehicle.

  Safety —  Anti-hit by pressure resistance bounce

While moving down, boom arm will immediately go back to vertical position once it is obstructed by an imposed force, which protects the vehicle or person not to be hit by boom arm. The sensitivity is adjustable.
Note: this function does not work when the angle is <9

  Safety—Anti-hit by Loop Detector (Optional)

While barrier boom moving down, if a coming vehicle was detected to be existing on the ground induction coil, the barrier boom will go back to vertical position immediately until loop input was dismissed and then the barrier boom will go down immediately.
Note: This function does not work when barrier boom horizontal angle is <9.

Anti-hit —  Infra Red Photo Cell (Optional)

While barrier boom moving down, if infrared transportation between transmitter and receiver is blocked by human or vehicle, the barrier arm will go back to vertical position immediately. The arm will automatically close once the infrared transportation recover.
Note: This function does not work when barrier boom horizontal angle is <9.

 Double safety —  Anti-hit by Loop Detector & IR Photocell (Optional)

To double protect a vehicle by installing a loop detector and a IR photocell.
While barrier boom moving down, if the infrared transportation between transmitter and received was blocked by a coming vehicle, the barrier     arm will go back to vertical position immediately. The arm will automatically close once the infrared transportation recovers.

Safety Anti-hit by “Opening Priority”

If a vehicle is coming while boom arm moving down, the boom arm will immediately go back to vertical position once a manual open command is given by guard by the push button or remoter transmitter, which protect the vehicle not be hit by boom arm.

Closing Priority

While arm moving up, the boom arm will immediately go down once a manual close command is given by guard by the push button or remoter transmitter.

Automatically Close by 1# loop detector (Optional)

If 1# loop detector is installed, after vehicle passed the barrier will automatically close once the loop input was triggered.

Automatically Open by 2# loop detector (Optional)

If 2# loop detector is installed, when arm is in horizontal position, the barrier arm will go up immediately once loop input was triggered.

 Always-open mode

Keep continuously pressing “Stop” button of remote transmitter for 4 seconds, arm will go up to vertical position and stay there until again keep pressing “Close” button of remoter transmitter for 4 seconds to finish always-open mode.

 Manual control

Once power is off, just open the cabinet and manually control the barrier by a gear mechanism. Also barrier boom can be manually locked in any position between horizontal and vertical, the lock status will remain until unlock manually.

 Anti-condensation  in cold climate

The barrier remains low power consumption even without closing and opening input, which will keep the motor in normal temperature.

Transparent plastic covers on Control Board

A transparent plastic covers on the Control Board to makes Control Board waterproof and dustproof, also protects operator.

Description

New digital torque motor barrier ESP-CPB04 is the first choice for your parking, no matter parking lots or high way toll gate.